2018年5月3日 星期四

Poster Session


NO.
Title
Reporter
P-01
Effect of latex binder on the capillary-driven network and properties of Li-ion battery slurry
Jieun Park
P-02
All-Printed stretchable thin film heater for thermochromic applications
Shiuan-Ying Peng
P-03
Effects of SiO2 on the Electrical Property of Poly(ethylene oxide) (PEO)-based Polymer Electrolytes
Sun Kyung Kim
P-04
Drying behavior of O/W emulsion containing volatile oil
Katsuyuki Hasegawa
P-05
Printing Stable Patterns on Curvilinear Surfaces for Omnidirectional Antenna
Hsien-Lung Chiu
P-06
Rheological effect of SiNP on the PVA-AgNW suspension and morphological and electrical properties of its film states
Seung Hak Lee
P-07
Rheological properties and drying behavior of electrode model slurries with poly(acrylic acid) at different pH
Min Hwan Jeong
P-08
Shear-induced migration of bidisperse suspension in Poiseuille flow
Jin Seok Park
P-09
Caproic acid capped Cu nanoparticles film with compact structure by intense pulsed light
Wan-Yu Chung
P-10
Control of structure of organic-inorganic hybrid perovskite thin films for solar cell devices using ultrasonic spray method
Kento Tanaka
P-11
Effect of film preparation condition on spatial structures of nanoparticles in polymer nanocomposite thin films
Naoto Kobayashi
P-12
Effect of Hybrid UV-LED on Cured State of UV Curable Resin
Keigo Sawa
P-13
Slot Die Simulation
Yu-Kai Lin
P-14
Speckle pattern analysis of the film formation process of emulsion – silicate paint
Taizo Fukatsu
P-15
Suppressed cracking by adding surface-active polymers in particle dispersion films
Kouhei Minobe
P-16
A facile approach to synthesize graphene nanosheets via microwave exfoliation for heat dissipation applications
Yi-Chin Lai
P-17
Slot coating of Perovskite solar cell layer
Kwanhong Do
P-18
Numerical computation of CNT fiber spinning process design for CNT/CSA solution
Minho Lee
P-19
Drying characteristics of suspensions affected by particle shape using multispeckle diffusing wave spectroscopy
Kevin Injoe Jung
P-20
Control of physical property and structure in thermally activated delayed fluorescence thin films prepared by coating process
Shun Ouchi
P-21
Mix Reactive Droplet in a Powder Bed
Ting-Yu Cheng
P-22
Numerical analysis of thermocapillary flows over substrate with topography using finite element simulation
Jaehyun Yoo
P-23
Measurement and analysis of 355 nm UV laser induced photopolymerization of stereolithography resin
Ken Tanaka
P-24
Preparation of p-type oxide semiconductor thin films by wet processes
Mai Miyazaki

2018年2月2日 星期五

Submission

Short abstract should be written under 200 words (Template Download) and no more than one page. 

All presenting author need to prepare abstract and submitted before April 16th.


2018年1月29日 星期一

Travel Information

Map of NTU

Welcome reception:
College of Engineering Building ( Discussion Room239)
Workshop & Lecture:
College of Engineering Building(203)
Poster exhibition:
College of Engineering Building(203) Hall
Transportation:

By Subway: The nearest subway station is Gongguan station (green line , G07), 10 min by walk.


Access to Taipei, Taiwan

Taipei is the capital and a special municipality of Taiwan.
Taipei is home to various world-famous architectural or cultural landmarks which include Taipei 101, Chiang Kai-shek Memorial Hall, Dalongdong Baoan Temple, Hsing Tian Kong, Lungshan Temple of Manka, National Palace Museum, Presidential Office Building, Taipei Guest House, Ximending, and several night markets dispersing over the city. Its natural features such as Maokong, Yangmingshan, and hot springs are also well known to international visitors.


Access to the University of Taiwan
NTU's institutional predecessor was Taihoku Imperial University, founded in 1928 by the Japanese colonial administration.
Now, the university has 11 colleges, with 54 departments and 103 graduate institutes, plus four university-level research centers: Population and Gender Studies Center, Center for Condensed Matter Sciences, Center for Biotechnology, and Bio-diversity Research Center. The total number of students, including those enrolled at the School of Professional and Continuing Studies, has grown to over 33,000, including over 17,000 university students and 15,000 graduate students. Now, the number of graduate students at NTU almost equals the number of university students, which indicates that NTU has successfully been transformed into a research university.
The nearest subway station is Gongguan station (green line , G07), 10 min by walk.







2018年1月24日 星期三

Program Overview


10th Asian Coating Workshop Schedule



May 9, 2018
Time
Event
Location
18:00 - 20:00
Registration
College of Engineering Building(203)
All Participants
18:30 - 20:30
Welcome Reception
College of Engineering Building(203)
All Participants
 May 10, 2018
Time
Report type
Speech Title
Speaker
Institution
Session I
Session Chair: Prof. Ying-Chih Liao
9:00 - 9:10
Ceremony
Opening Remark
Wen-Chang Chen
National Taiwan University
9:10 - 9:35
Keynote
From Lab Coating Research to Industrial Coating Products
TaJo, Liu
National Tsing Hua University
(Company)
9:35 - 10:00
Keynote
Back diffusion in drying liquid films
Masato Yamamura
Kyushu institute of technology
10:00 - 10:25
Keynote
e-Paper Application and Manufacturing Technology
Peter Peng
E-Ink
(Company)
10:25 - 10:50
Poster Set-up & Coffee break
Session II
Session Chair: Prof. Masato Yamamura
10:50 - 11:15
Keynote
Recent studies on drying of colloidal suspensions and
emulsions
Susumu Inasawa
Tokyo University of Agriculture and Technology
11:15 - 11:40
Keynote
Analysis of thin film formation flows
(Recent research in Nam’s group)
Jaewook Nam
Seoul National University
11:40 - 12:05
Keynote
On the recent development of coating technology and applications in the Institute of Applied Mechanics, National Taiwan University
An-Bang, Wang
National Taiwan University
12:05 - 13:00
Lunch
Session III
Session Chair: Prof. Susumu Inasawa
13:00 - 13:25
Keynote
Rheological investigation of the slurry of positive electrode of LiB for understanding the formation of internal structure
Yoshiyuki Komoda
Kobe University
13:25 - 13:50
Keynote
Challenge for well-designed coating process of organic/inorganic semiconductor films.
Enju Sakai
The University of Tokyo
13:50 - 14:15
Keynote
Recent studies on precision printing and ink formulation development at Department of Chemical Engineering, National Taiwan University
Ying-Chih Liao
National Taiwan University
14:15 - 14:30
Coffee Break
Session IV
Session Chair: Prof. Jaewook Nam
14:30 - 14:33
Student Oral
Effect of latex binder on the capillary-driven network and properties of Li-ion battery slurry
Jieun Park
Seoul National University
14:33 - 14:36
Student Oral
All-Printed stretchable thin film heater for thermochromic applications
Shiuan-Ying Peng
National Taiwan University
14:36 - 14:39
Student Oral
Effects of SiO2 on the Electrical Property of Poly(ethylene oxide) (PEO)-based Polymer Electrolytes
Sun Kyung Kim
Pusan National University
14:39 - 14:42
Student Oral
Drying behavior of O/W emulsion containing volatile oil
Katsuyuki Hasegawa
Tokyo University of Agriculture and Technology
14:42 - 14:45
Student Oral
Printing Stable Patterns on Curvilinear Surfaces for Omnidirectional Antenna
Hsien-Lung Chiu
National Taiwan University
14:45 - 14:48
Student Oral
Rheological effect of SiNP on the PVA-AgNW suspension and morphological and electrical properties of its film states
Seung Hak Lee
Pusan National University
14:48 - 14:51
Student Oral
Rheological properties and drying behavior of electrode model slurries with poly(acrylic acid) at different pH
Min Hwan Jeong
Seoul National University
14:51 - 14:54
Student Oral
Shear-induced migration of bidisperse suspension in Poiseuille flow
Jin Seok Park
Korea University
14:54 - 14:57
Student Oral
Caproic acid capped Cu nanoparticles film with compact structure by intense pulsed light
Wan-Yu Chung
National Taiwan University
14:57 - 15:00
Student Oral
Control of structure of organic-inorganic hybrid perovskite thin films for solar cell devices using ultrasonic spray method
Kento Tanaka
The University of Tokyo
15:00 - 15:03
Student Oral
Effect of film preparation condition on spatial structures of nanoparticles in polymer nanocomposite thin films
Naoto Kobayashi
Tohoku University
15:03 - 15:06
Student Oral
Effect of Hybrid UV-LED on Cured State of UV Curable Resin
Keigo Sawa
Kanazawa University
15:06 - 15:09
Student Oral
Slot Die Simulation
Yu-Kai Lin
National Taiwan University
15:09 - 15:20
Tea Time
Poster Presentation: Q&A and Discussion
Session V
Session Chair: Prof. Yoshiyuki Komoda
15:20 - 15:23
Student Oral
Speckle pattern analysis of the film formation process of emulsion – silicate paint
Taizo Fukatsu
Kobe University
15:23 - 15:26
Student Oral
Suppressed cracking by adding surface-active polymers in particle dispersion films
Kouhei Minobe
Kyushu Institute of Technology
15:26 - 15:29
Student Oral
A facile approach to synthesize graphene nanosheets via microwave exfoliation for heat dissipation applications
Yi-Chin Lai
National Taiwan University
15:29 - 15:32
Student Oral
Slot coating of Perovskite solar cell layer
Kwanhong Do
Sungkyunkwan University
15:32 - 15:35
Student Oral
Numerical computation of CNT fiber spinning process design for CNT/CSA solution
Minho Lee
Seoul National University
15:35 - 15:38
Student Oral
Drying characteristics of suspensions affected by particle shape using multispeckle diffusing wave spectroscopy
Kevin Injoe Jung
Korea University
15:38 - 15:41
Student Oral
Control of physical property and structure in thermally activated delayed fluorescence thin films prepared by coating process
Shun Ouchi
The University of Tokyo
15:41 - 15:44
Student Oral
Mix Reactive Droplet in a Powder Bed
Ting-Yu Cheng
National Taiwan University
15:44 - 15:47
Student Oral
Numerical analysis of thermocapillary flows over substrate with topography using finite element simulation
Jaehyun Yoo
Seoul National University
15:47 - 15:50
Student Oral
Measurement and analysis of 355 nm UV laser induced photopolymerization of stereolithography resin
Ken Tanaka
Kanazawa University
15:53 - 15:56
Student Oral
Preparation of p-type oxide semiconductor thin films by wet processes
Mai Miyazaki
The University of Tokyo
15:56 - 17:00
Poster Presentation: Q&A and Discussion
17:30 - 20:00
ACW Member Meeting
Seafood Steam Pot
All Professors & Industrial Representatives
17:30 - 20:00
International Student Tour
Eyaji Restaurant
All International Students
May 11 , 2018
Time
Event
Chair
Institution
09:00 - 09:30
Gathering at NTU main entrance
Ying-Chih Liao
National Taiwan University
09:30 - 10:00
Transit to E-Ink
-
E-Ink Company Show Room
10:00 - 11:30
E-Ink Show Room
Peter Peng
11:30 - 13:00
Lunch
13:00 - 14:00
Transit to Vigor Dream Factory
-
Vigor Dream Factory
14:00 - 17:00
Vigor Dream Factory
All Professors and Students
1700
Banquet (Howard Civil Service International House)
All Professors and Students

Instruction for Poster Presentation
• Poster formThe space available is 841 mm x 1189 mm (width x height).
•The poster session will take place on Thursday 10 May from 09:30 to 16:00. This includes the time to meet conference participants and answer questions. This will be the ONLY time that your poster will be on display and that other conference members will be able to see it. It will be an interactive session, so come ready to talk to your ‘viewers’, and to answer questions!

Instruction for Oral presentation

Presentation time is 3 minutes.

If you have any question, feel free to send e-mail to us.




In ACW2018, wonderful session will be held on each day.

Program at a glance


May 9 (Wed)
May 10 (Thu)
May 11 (Fri)
Morning
-
Topical Session (Professor)
Site visit to E-ink Factory
Afternoon
-
Presentation (Student)
Site visit to Vigor Dream Factory
Evening
Registration
Welcome Reception
Faculty Meeting
Banquet
Dinner
(International Student )

Poster Session

NO. Title Reporter P-01 Effect of latex binder on the capillary-driven network and properties of Li-ion b...